Welcome to the Help Center

Move/5000 LTE - Setup

Enable LTE

The Move/5000 LTE has a WIFI, LTE, and Bluetooth connection. To activate the LTE connection (data plan required, please contact support@mytime.com If you need a data plan) you need first to disable WIFI. To do this:

  1. Click 2634 on the Move/5000 keypad 
  2. Press F (this is the circle key above the red X) 
  3. Select Control Panel 
  4. Select Terminal Settings 
  5. Select Communication Means
  6. Select WIFI 
  7. Select Switch OFF 

Press the red X to return the terminal home screen. From here the terminal will connect to LTE. It may take 2-3 minutes. To check the connection status press 0000 for the terminal status screen. In the top right corner, it will display the LTE status. 

  • Yellow 🟡 circular symbol = establishing connection 
  • Gray 📶 cellular symbol = not connected, move to a different area and wait 
  • Green 📶 cellular symbol = connected 

If the terminal will not establish a LTE connection after 5-10 minutes you can try rebooting the Move/5000 by holding the yellow key + # key then power on the terminal by holding the green key. 

 

Troubleshoot

 
Powered by Zendesk